As an Amazon Associate I earn from qualifying purchases.
YGKJ 3M Adhesive Metal Plate, 4 Packs Universal Thin Metal Plates Replacement Accessory Kits for Magnetic Car Phone Holder 2 Round and 2 Rectangle BlackYGKJ
- It will not come off and no sticky residual left after detaching. The thickness of the product is only 05mm, which is light and practical. 3m adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone.
Please contact us first if there is anything wrong, we will reply within 24 hours and solve all your problems. 4-pack replacement metal plate -4. 5cm*6. 5cm rectangular metal plate x 2 Pieces, round metal plate with a diameter of 4cm X 2 Pieces.
Worry-free warranty-we only provide quality products and we will provide 12 months money back guarantee and reliable Customer Service. Light and practical -the product is made of high-quality manganese steel material.
They are works well and is easy to install. Please kindly know that the metal plate is without magnetic, They are just replacements compatible with magnetic car mounts. Universal compatibility -ygkj metal plate works with most magnetic phone support. Strong adhesion -ygkj metal plate has strong adhesive, keeping your device stable and secure while driving.
AJOXEL Metal Plate for Phone, Black+Silver, 10 Pack Replacement Mount Metal Plates Kits with 3M Adhesive Universal for Magnetic Car Phone Holder Cradle Magnet Car Mount 4 Rectangular and 6 RoundAJOXEL
- Dimension: rectangle - 1. 8" x 2. 6", round one 's diameter - 1. 57 inch. Note: for wireless charging, please place metal plate on the phone away from wireless charging sensor. Tear off the blue protective film, cd slot or windows. You may share them with your family or friends to use.
Lighter and thinnerwith the thickness of 05 mm, the slim and thin metal magnet plates can be easily attached to your devices, and will do no interference to the magnets of your magnetic mount. Wide compatibility the metal plates can be used to all magnetic car mounts for dashboard, these must be used with magnetic car mount.
Smooth surface with round edges protects your fingers or devices from getting hurt. Firstly stick the clear sticker on the back of your phone or phone case, then place the metal plate on it or put metal plate between device and its case.
The mount metal plates are perfect solution to the magnetic phone holders that are lack of metal discs Note: these metal plates themselves are not magnetic, air vent, your can see silver surface. It will not come off, Keeps your device stable and secure while driving. Or place metal plate on phone case, remove case when wireless charging. The 3m adhesive is strong enough to hold the phone even with a case on it.
|Height||7.62 cm (3 Inches)|
|Length||17.78 cm (7 Inches)|
|Weight||0.04 kg (0.09 Pounds)|
|Width||12.7 cm (5 Inches)|
10 Pack Black 4 Rectangle and 6 Round, OWLKELA Mount Metal Plate for Phone Magnet Car Mount Holder Cradle with Adhesive, Universal Replacement Sticker Compatible with Magnetic MountsOWLKELA
- Installation and removal are fast without any tools. 3, easy to use: each metal plate with 3m adhesive, which is easy to stick onto the back of phone or case. 6 pack small round for multiple smaller devices. 4, exquisite design: the ultra-thin metal plate is almost invisible in your phone, and the smooth surface protect phone from scratches.
Important note: these metal plates are not magnetic plates, they are used with universal magnetic mounts. 2, universal metal plate: these metal plates are suitable for any magnetic mounts.
When wireless charging, please place the metal plate away from the wireless charging sensor. 4 pack rectangular metal plates are better for larger phones, mini tablets and GPS devices.
Give you enough options to use with multiple devices. 1, perfect size: 10 pack metal plates, i phone 11, we offer two different sizes.5, durable & stable: the 3m adhesive provide high stickiness to attach with your phone for long lasting and stable hold, which allows you to place your phone horizontally or vertically. Perfect replacement for magnetic mount. The metal plates are designed to use with magnetic phone car mount, magnetic air vent mount etc.
8 Pieces Metal Plate Mandala Flower Mount Metal Plate for Cell Phone Magnet Holder Magnetic Car Mount Compatible with Magnetic Car Mounts Replacement StickerWeewooday
- Nice adhesion: each universal metal plate has adhesives tape and easy to stick onto the back of the phone or case, so these plates set your phone on the car mount easier and more securer and you can go hands-free even on the bumpiest of roads, which will give you pretty convenience.
Exquisite pattern: the metal phone plate printed with stylish mandala flower pattern, which is delicate and novel, easily catching the attention of people, multiple design and bright color, a good decoration for your phone.
Thin metal plates: with a thickness of 05 mm, thin and comfortable to use; a smooth surface with no pointed edges will not hurt your fingers and smartphone, slim metal plates for magnetic mount easily attach to your phone, bringing you a nice experience.
Metal plates replacement: magic metal plates work with any device and can be applied as replacement plates for a strong secure grip, work along with a universal magnetic smartphone holder, magnetic air vent mount, and dashboard magnet car mount. What will you get: you will receive 8 pieces of metal plates in 8 different mandala patterns, and each pattern has 1 piece, the metal sheet is extremely thin so that it can be hidden inside of phone case without adding bulk.
|Part Number||Weewooday-Metal Plate-Xg001|
5. Mega Mounts
Mega Mounts Metal Plates Replacement Mount Metal Plate Kits with Adhesive for Magnetic Car Phone Holder Magnet Cradle Mount, Pack of 2, Compatible holder and other Magnetic HolderMega Mounts
- Universal Compatible. It will not come off and no sticky residual left after detaching. Tips for wireless charging: Either place the metal plate at the bottom of your phone or detach it when charging.
Please stick the protective film on your phone or case firstly before putting the metal plate on, to protect your phone or case from scratches. Wide compatibility: mega mounts metal plate is not only compatible with Mega Mounts magnet holder, but also can be used to almost all similar magnetic phone holder.
Strong adhesion: mega mounts metal plates have the strongest adhesive on its back, keeping your device stable and secure while driving. Scratch-resistant: scratch-resistant protective films are packed inside.
6 Round and 6 Rectangle, MENNYO Metal Plate 12 Pack for Magnetic Phone Car Holder Mount Cradle Stand, Universal Replacement Thin Metal Plate with Adhesive for Phone MagnetMENNYO
- Dimension: rectangle – 65x45mm, round - 40mm in diameter. Strong adhesive plate : each metal plate has a strong adhesive tape on the back. Universal compatibility : the replacement metal plate is universal and perfectly works with all magnetic telephone holders, dashboard magnet car mounts, magnetic air vent mounts, and other kinds of car stands.
Note for wireless charging phones, stick the metal plate below or above the charging area of the phone. Durable manganese steel : made of 06mm thick strong Manganese Steel, not easy to deformation.
Note these metal plates are not magnetic. It’s easy to stick the plate on the back of the phone or case firmly and securely, mini tablets, making the plate compatible with all kinds of phones, GPS and many more devices.
Easy to use : simply stick the metal plate to the back of the phone or the back of the phone case or the inside of the phone case. What’s more, these metal plates are tough, a smooth surface with no sharp edge would not damage your fingers and your phone. Rectangular and round metal plate : two types of metal plates – round and rectangular – are provided for more options to apply on multiple mobile phones, GPS and mini tablets.
SPHIRES 4 Pack Metal Plate for Magnetic Phone Car Mount 2 X Round and 2 X Rectangular Metal Plate for Car Magnetic Phone Holdersphires
- Install the metal plate behind your phone case or place it in between your phone and case. These car metal plates themselves are not magnetic. These phone magnet metal plates are without a hole on the top, which prevents dust.
Sphires sheet metal for car magnet phone holders allows you to have an easy installation. These are just Metal. This phone magnet sticker is compatible with all phone magnetic car holder.
|Height||1 cm (0.39 Inches)|
|Length||9.5 cm (3.74 Inches)|
|Width||4.5 cm (1.77 Inches)|
Rectangle Metal Plate for Phone Magnet, Volport Magicplate Replacement Disc with 3M Adhesive Backing Sticker for Magnetic Car Mount Holder Cradle Stand Dashboard / Vent/ CD Slot / Windshield-Blackvolport
- This large ultra thin spare metal stickies plate disk pad without hole is lightweight and easy to take away. It helps to attach devicessmart phones, iPad, tablet, mobile phone/smartphone onto dash/desk magnets ball/suction/window/finger/gooseneck/ motorcycle/auto/suction cup/arm/balls/tripod bracket holders securely.
Extra strong stickiness: each slim metallic metal cell phone plate with 3m heat resistant self-stick adhesive glue backs, which is easy to stick onto the back of phone or inside case insert. 4-piece metal plate cover is enough for you to replace.
Package content : 4 x ultra thin friendly replaceable self stick car mount pattern magnetized metal plate disks replacements set, 4 x alcohol packs, 4 x transparent protective film. Excellent workmanship casts sleek and round edges.
Volport chase to provide high-quality product and satisfactory after-sales service for buyers. Please do not hesitate to contact us if you have any questionswithin 12 months and our customer service team is stand by 24 hours of the day to solve your problems. Your satisfaction is our top priority. Extremely thin metal attachment plates kit woks well with vehicles phone mount, wall, phone case, etc. It is heavy duty flat steel sheeting mobile metal disc, without magnetism. It is a must-have accessory in your daily life.
Silver, Sticky Back Adhesive, VIPETECH 5x Phone Magnet Metal Disc Plate For Any Magnetic Car Phone Holder MountVIPETECH
- Pack of 5. Sticky Back Adhesive. Metal plate works With Any Magnetic Phone Holder. Size: 35mm. This is not A Magnet.
Universal, Black, Olixar Phone Magnet Sticker, Rose Gold & Gold, 4 Pack, Thin Magnets Stickers Mount Magnetic Plate, Silver, Phone Case Magnet, Put In Phone Case And Use With Car Phone HolderOlixar
- 4 pack includes black, silver, rose gold and gold phone magnet stickers. If you don't want them to be seen, simply stick them to the inside of your case. These magnetic phone holder plates are strong enough to work with any car holder, and inside the bulkiest of cases.
Manufacturers guarantee 2 year warranty as standard for these Magnet stickers for phone crafted by Olixar. The phone magnetic plate will not let you down and can be attached directly to the back of your phone or case.
Universal compatibility sticky magnets for phone guaranteed to work with magnetic mounts for dashboard, CD slots and more. Use with your phone case phone magnet sticker designed to match perfectly with your device, the choice of magnetic stickers for phone will blend in with your device or case.
Mount metal plate to phone, windscreens, vents, and use with any holder!. Extra strong magnetic hold magnet for phone holder with powerful magnetic hold. Super strong adhesive featuring an adhesive back, simply clean, peel and stick.
|Height||0.2 cm (0.08 Inches)|
|Length||12.5 cm (4.92 Inches)|
|Weight||0.01 kg (0.03 Pounds)|
|Width||12.5 cm (4.92 Inches)|
|Warranty||2 Year Manufacturer Warranty|