As an Amazon Associate I earn from qualifying purchases.
1124, SMALLRIG Super Clamp with Ballhead mount for Camera Monitor, LED lightSMALLRIG
- You can take off the articulating arm part and change it to a cold shoe clamp mount. Mounts onto anything like cameras, plate glass, umbrellas, shelves, lights, hooks, cross bars, even other Super Clamps.
This super coolclamp mount with 1/4" screw, made of lightweight Aluminum Alloy. The best load
|Height||2.5 cm (0.98 Inches)|
|Length||9.5 cm (3.74 Inches)|
|Weight||0.02 kg (0.04 Pounds)|
|Width||8.5 cm (3.35 Inches)|
SMALLRIG Univerial Camera Ballhead Magic Arm with Super Clamp Mount, 2161SMALLRIG
- Clamp opening range the clamp jaws max open to 54mm, and minimum close to 12mm. The clamp inside features rubber cushions which increases friction and prevent the clamp from falling.
Richer extension the 1/4” screw could attach monitor or video light on it. The ballhead can be adjusted and tightened with a wingnut in any angles. Note: the 1/4 screw max load must be less than 1kg. Ball head magic arm smallrig ballhead clamp magic arm adapter 2161 includes a SMALLRIG Univeral Magic Arm 2157 and super clamp 735.
Also, freefly stabilizer, the clamps is compatible with accessories with diameter less than 54mm, like DJI stabilizer, video C-stand etc. Adjustable ballhead the ball head feature two 1/4” screw, one end for monitor or video light and the other end for the bottom clamp. Anti-slip pad with the anti-slip pad on the ballhead, which prevent the monitor from scratching.
|Height||2 cm (0.79 Inches)|
|Length||11.9 cm (4.69 Inches)|
|Weight||0.16 kg (0.36 Pounds)|
|Width||8.6 cm (3.39 Inches)|
2790, SMALLRIG Aluminum Power Bank Holder, Powerbank Mount Clamp for Portable Power Banks with Width Range from 53mm to 81mmSMALLRIG
- Width range 53mm-81mm:the power bank mount features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 81mm, which covers most products in the market. Lightweight and durable：the power bank holder is made of aluminum alloy and stainless steel, it is very sturdy and durable.
For power bank:smallrig power bank holder 2790 is designed for portable power banks, it could attaches a power bank to the camera rig and mobile phone rig when a sustainable charging solution is required.
Protect power bank surface：This powerbank clamp comes with soft rubber cushions inside, which can protect your power bank from scratching.
Moreover, the net weight is about 80 grams, lightweight for you to carry around. Mounting points：smallrig power bank holder 2790 comes with two 1/4 screws, which can be used to attach the holder to the desired place, and the screw tighten design ensures a more secure and stable clamping of the power bank.
|Height||3.5 cm (1.38 Inches)|
|Length||8.15 cm (3.21 Inches)|
|Weight||0.08 kg (0.18 Pounds)|
|Width||3 cm (1.18 Inches)|
Shelves, Hooks, SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Photography/Video/Audio Accessories 735, Plate Glass, Umbrellas, Lights, Cross BarsSMALLRIG
- Jaw opens from 15 to 58mm: that is to say, bike handlebar, you could mount it on anything from 15mm to 58mm, table, Dji handheld bar, such as 15mm rods, table, 19mm rods, etc. Better protection for you: we use the better rubber for the jaw of the super clamp, which is more durable and thick than others.
Versatile tool for you: mounts onto anything like cameras, umbrellas, cross bars, shelves, lights, plate glass, hooks, even other super clamps. The surface of the clamp is very smooth and is comfortable to hold.
1/4"-20 and 3/8"-16 thread: you can connect and mount a variety of accessories according to your needs, such as SmallRig Magic Arm 2070/1497, SmallRig Ball Head 1135. It helps you to grab your equipments more firmly and protects your accessories. Well made, durable and stable: this clamp made of lightweight aluinum alloy and stainless steel, which is anti-rust and very durable.
|Height||4.5 cm (1.77 Inches)|
|Length||4.4 cm (1.73 Inches)|
|Weight||0.13 kg (0.29 Pounds)|
|Width||2 cm (0.79 Inches)|
1138, SMALLRIG Cool Ballhead Clamp Mount with Mini Magic ArmSMALLRIG
- Feature a protective dense rubber pad on clamp area to prevent scratches. Featurescan also be used as a action camera mount on motorbike or hold a microphone on a boom arm, compact cameras, flashes, mount of small cameras, monitors, phones, handheld gimbals and other devices.
It can mount monitors and led Lights to DSLR, 360 degree articulation when shooting.
Ballhead mountsmallrig 1138 is a multi-function double ball head with bottom clamp and 1/4" screw. High qualitythis smallrig super clamp is made of nearly all metal aluminium alloy, solid and sturdy. Materialaluminum Alloy. Purposecan be mounted directly to a dSLR or camcorder's, or mounted directly to any rods, tube up to 54mm diameter.
|Height||2.5 cm (0.98 Inches)|
|Length||9.5 cm (3.74 Inches)|
|Weight||0.2 kg (0.44 Pounds)|
|Width||8.5 cm (3.35 Inches)|
KBUM2731, SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI 2 PcsSMALLRIG
- 1/4” screw connectionit can mount the monitor and led lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob.
Adjustable easilyit could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. It is made by Aluminum Alloy, very sturdy and lightweight.
2 pcs / packsmallrig kbum2731 comes with two multi-function double Ballhead, which is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. Loading capacitythe best load < 1. 21kg. Compatiblitythe rod clamp fits for dji ronin & freefly MOVI Pro & all 30mm rods and can also be adjusted with ease.
|Height||5.5 cm (2.17 Inches)|
|Length||14.3 cm (5.63 Inches)|
|Weight||0.4 kg (0.88 Pounds)|
|Width||10 cm (3.94 Inches)|
KBUM2732, SMALLRIG 10 Inch Magic Arm with Super Clamp Large Crab Pliers Clip for Monitor LED LightSMALLRIG
- 360° rotatable ball head designed allows you to adjust angles freely. 1/4" screw on each end to connect any on-camera flash lights, microphone, LCD monitor, microphone or action camera.
The non-slip rubber cushion increases the friction force and reduce scratches. It comes with a super clamp and a 10 inch maigc arm. Made of aluminum alloy and stainless steel, sturdy and durable.
Package includes: 1 x super clamp, 1 x 10 inch magic arm. The super clamp be mounted virtually anywhere, plate glass, cross bars, hooks, such as cameras, shelves, umbrellas, lights, even other super clamps. The maximum playload is 1. 5kg. The super clamp is made of lightweight aluminum alloy, features 1/4" and 3/8" thread.
|Height||4 cm (1.57 Inches)|
|Length||22 cm (8.66 Inches)|
|Weight||0.33 kg (0.73 Pounds)|
|Width||11 cm (4.33 Inches)|
2989, SMALLRIG Mini V Mount Battery Plate with Crab-Shaped ClampSMALLRIG
- 3. This is purely a mounting solution for a V-mount battery — no power ports on the plate. No v-lock part male provided with the plate. 2. In order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate refer to the picture for installation form.
Note: 1. It comes with a crab-shaped clamp that fits rod diameter from 15mm to 30mm to help mount a V mount battery to a tripod, a light stand, or a handheld ring for gimbals.
Smallrig mini v mount battery plate with crab-shaped Clamp 2989 utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power ports.
The mini shape design makes it lighter and more portable. The plate itself features two 1/4-20" countersinks, two 1/4-20" thread holes, and four m4 thread holes, or other accessories, which can be used to attach a dual rod clamp, a magic arm, will help mount a V mount battery to your camera rig as needed.
|Height||6.5 cm (2.56 Inches)|
|Length||9.7 cm (3.82 Inches)|
|Weight||0.15 kg (0.33 Pounds)|
|Width||7.2 cm (2.83 Inches)|
1686, SMALLRIG 15mm Rod Clamp with Rosette Mount for Shoulder RigSMALLRIG
- Which allows you to attach other rosette accessories such as smallrig rosette Arm 1684, Rosette Arm 1807, Wooden Handle 1941, Rosette Handle 1963, EVF Mount 1938.
Tighten down with a M5 black locking lever, which saves your time on operation. Materials:Aluminum Alloy. Smallrig rod clamp 1686 is a 15mm rod clamp to rosette mount adapter.
This rod clamp features a rosette for arri standard on one end. The rosette is in arri standard, which is 31. 8mm in diameter and has a M6 thread on center. You can attach this rod clamp to 15mm rod. This 15mm rod clamp works as an adapter for shoulder rig.
|Height||4.3 cm (1.69 Inches)|
|Length||3.18 cm (1.25 Inches)|
|Weight||0.05 kg (0.11 Pounds)|
|Width||3.18 cm (1.25 Inches)|
SMALLRIG Monitor Mount with NATO Clamp for DJI RS 2/RSC 2, 3026SMALLRIG
- Notice: max payload 1. 5kg. For dji rs 2/rsc 2smallrig 3026 monitor mount for dji rs 2/rsc 2 can be installed on two sides of the stabilizer by NATO clamp. Compatibilitythere are two 1/4”-20 threaded holes on top of the monitor mount, which can be attached with Magic Arm 2163 for action camera or other rigs.
Wide applicationsit is designed for adding accessories on both sides of the stabilizer, sound receiver, such as to monitor, action camera, light, wireless device, etc.
Anti-removalclamps to each side of rs 2&rsc 2 via quick-release NATO clamp with anti-removal stud, which protects your devices from falling.
On top and bottom of it, there is one cold shoe mount that can be attached with a sound receiver, light, and one 1/4 threaded hole on side of it, microphone, etc. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer. Adjustable for 165°the monitor mount is adjustable for 165° and can be stopped at any angle.
|Height||5.25 cm (2.07 Inches)|
|Length||13.4 cm (5.28 Inches)|
|Weight||0.11 kg (0.25 Pounds)|
|Width||4.2 cm (1.65 Inches)|