As an Amazon Associate I earn from qualifying purchases.
2837, New Version SMALLRIG Quick Release Shoulder Plate Pro with Built-in Rosette Mount and 15mm Rod Clamp for Sony VCT-14 Tripod AdapterSMALLRIG
- Dual rod systemthe front and rear ends of the dual rod system have a standard diameter of 15mm and a spacing of 60mm. Updated versionthis shoulder plate pro 2837 is an upgraded version of shoulder plate 1954. Smallrig shoulder pad pro 2837 is designed for SONY VCT-14 quick release baseplate, which fits the camera through with Manfrotto 501 quick release plate.
Adjustable center gravityin order to facilitate users to adjust the equipment’s center gravity and install the following focus and matte box, and the front two tubes can be adjusted together with the quick release plate, 2837 can be adjusted forward about 80mm through with built-in Manfrotto 501 quick release plate, so there is no need to remove the equipment such as follow focus and matte box.
Moreover, fs5, which can guarantee the spacing between the lens center to be 85mm as the standard to fit with FX9, URSA MINI, the front-end dual rod system can save 24mm for up-regulating, CANON C300.
Exqusite designthe shoulder pad adopts the new silicone shoulder pad, which can be used for installing magic arm and other products. In addition, which conforms to the shape of human shoulders. Quick releaseusers can realize a rapid switch between shoulder shooting and tripod shooting through the shoulder pad. Both sides come with two rosette mount for M6 ARRI standard，which can be installed with the original control handle of 1810 or FX9 machines. The right side of 2837 is reserved with a 1/4"-20 threaded hole, the 2837 built-in flat wrench can be used on-demand.
|Height||5.1 cm (2.01 Inches)|
|Length||25.1 cm (9.88 Inches)|
|Weight||0.74 kg (1.63 Pounds)|
|Width||9.8 cm (3.86 Inches)|
2988, SMALLRIG V-LOCK Mount Battery Plate Quick Release PlateSMALLRIG
- This is purely a mounting solution for a V-mount battery — no power ports on the plate. Sweet designtwo stoppers prevent the battery from twisting when attached. Please note1. The plate supports a variety of different installation ways and is compatible with the Blackmagic URSA mini.
No v-lock part male provided with the plate. Compatibilitythe mount features a v-lock mount with a quick release lever that fits most v-mount batteries but it is not compatible with PAGlink series V mount batteries and it is not compatible with Patona Premium Battery for BP-190WS.
V-lock battery platesmallrig 2988 v mount battery plate 2988 utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power ports.
Multiple mounting pointsit features multiple 1/4-20" countersinks, 1/4-20" thread holes, M3 countersinks, a magic arm, m4 thread holes, m4 countersinks, and an ARRI 3/8" -16 thread hole to attach a dual rod clamp, or other accessories. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear. 2. It is constructed with durable aluminum and Allen wrenches are included for mounting.
|Height||1.38 cm (0.54 Inches)|
|Length||9.05 cm (3.56 Inches)|
|Weight||0.14 kg (0.31 Pounds)|
|Width||7.2 cm (2.83 Inches)|
2092, SMALLRIG Baseplate with Quick Release Plate, Rod Height Adjustable Camera Tripod Mounting Plate for Universal 15mm LWSSMALLRIG
- Universality smallrig baseplate 2092 is designed for most mirrorless and dslr cameras. Compatible with sony a6000/a6300/ a6500/a7/a7ii/a9/a7riii, for fujifilm x-t2, for panasonic GH3/GH4/GH5/G80 GX85/ G85/G7, for BMPCC.
Quick switch the base plate comes with qr plate for arca standard, It locks the QR plate via a locking lever for quick release and attachment, so it is very easy to switch to handheld shooting. Support 15 mm lws system attach a 15mm rod 1053 for follow focus, matte box and Long Lens Support with Dual 15mm Rod Clamp 1087 based on your needs.
Height adjustable the base plate’s height is adjustable via a wingnut, and thus it enables 85mm rod height. Mounting points equipped with 1/4'' and 3/8'' threaded holes at the bottom to attach QR plates and then tripod. The height from QR plate to rod center ranges from 33. 6mm to 57. 6mm.
|Height||5.7 cm (2.24 Inches)|
|Length||10.8 cm (4.25 Inches)|
|Width||7.2 cm (2.83 Inches)|
|Warranty||Manufacturer warranty for 2 years from date of purchase.|
SMALLRIG A7 IV Camera Baseplate, Baseplate Camera Grip for Sony Alpha 7 IV, 3666, Base Mount Bracket for Arca-TypeSMALLRIG
- Comfortable grip: there is a spindle spanner at the battery door which fits the camera curve and leaves room for a little finger for a comfortable grip and embedded select genuine leather in the baseplate integrates into the camera body.
A lanyard slot is also provided on the side. It features a 1/4" -20 screw and locating pin, with features built-in silicone pad to prevent scratches and twisting. Anti-twist: the base plate of the case bottom is made of lightweight aerospace-grade aluminium alloy.
Sweet design: a magnetic flat-head screwdriver comes inserted in a dedicated slot on the bottom. For sony alpha 7 iv: smallrig baseplate for sony alpha 7 IV 3666 aims to enhance the gripping experience and enable tripod and handheld shooting by protecting the bottom of the camera.
Quick switch: the bottom of the base mount bracket integrates a Swiss plate for Arca that allows switching directly to tripod shooting and features a 1/4" -20 screw and locating pin allowing for mounting RS 2/RSC 2.
|Height||1.25 cm (0.49 Inches)|
|Length||13.2 cm (5.2 Inches)|
|Weight||0.09 kg (0.2 Pounds)|
|Width||6.5 cm (2.56 Inches)|
|Warranty||Manufacturer warranty for 1-year from date of purchase.|
Hawell Universal Quick Release Plate Fits Arca-Swiss Standard for Camera Tripod BallheadHawell
- Compatible with any "Arca-Swiss" type quick release system. Ultra-compact and lightweight quick release plate. Size: 50*40mm. Precision machined from high quality aluminum. Grooved rubber pad provides traction.
|Weight||0.04 kg (0.09 Pounds)|
Neewer® Aluminium 50mm Quick Release Plate QR Clamp 3/8-inch with 1/4-inch Adapter and Built-in Bubble Level for Benro Acratech Kirk Wimberley Gitzo Manfrotto RRS Arca Swiss and Other Arca-Style Quick Release PlateNeewer
- Adapter jaws will accept plates from 38-42mm wide. 50mm1. 97" in length accepts plates of any length securely. Built in Bubble level. Made from durable anodised aluminium; 3/8"-16 thread with metal 1/4"-20 Adapter. Arca swiss fitting allowing for newer style plates with security screws.
|Weight||0.1 kg (0.22 Pounds)|
SMALLRIG Mounting Plate Kit Offset Kit for BMPCC 4K & 6K and Ronin S Crane 2 Moza Air 2, BSS2403SMALLRIG
- The kit includes a plate and a clamp, and should be used with the original gimbal plate. Compatible with smallrig 2247the plate kit comes with a detachable part that works with SMALLRIG Metabones Support 2247, for holding metabones lens adapter.
Millimeter scalethe mount plate features millimeter scale for easily finding the right position for the camera on gimbals. For bmpcc 4k & 6k gimbalssmallrig plate kit bss2403 is designed to provide more clearance for bmpcc 4K & 6K and Ronin S, Crane 2, Moza Air 2 when mounted to gimbals.
With the plate kit, you can adjust the camera position left and right. Anti-twistthe plate comes with anti-twist pins and rubber cushions which prevents your camera from wiggling and scratching. Helping on left & right adjustmentthe mount clamp features a red lever could help you to attach and detach the quick release plate quickly.
|Height||1.81 cm (0.71 Inches)|
|Length||9.8 cm (3.86 Inches)|
|Weight||0.12 kg (0.26 Pounds)|
|Width||7.25 cm (2.85 Inches)|
Black TILTA TA-BSP4-15-B/TA-T08-BSP-B 15mm LWS Baseplate for Tilta Sony FX3 RED Komodo Cage RigTILTA
- This 15mm lws baseplate attaches to the base of the full camera cage for RED Komodo to allow you to rig essential accessories on 15mm LWS rods such as a follow focus or matte box.
1/4 Screw Hole Quick Release Plate Camera Fit Plate Compatible for Manfrotto 200PL-14, Rosilesi 1 * Quick Release PlateRosilesi
- Can fix your camera stably and prevent rotation when install the camera on tripod head. Made of metal alloy, that will be more durable and lightweight to carry.
Can help to reduce the rub between your camera and the tripod head. Help you operate and change your machine very fast and save time to take more photos. Compatible for manfrotto 200PL-14, and it is suitable for various Manfrotto.
|Height||0 cm (0 Inches)|
|Length||0 cm (0 Inches)|
|Weight||0.07 kg (0.15 Pounds)|
|Width||0 cm (0 Inches)|